TB adapter for LS6 Intake Swap
07-06-2018, 09:05 AM
#1
Teching In
Thread Starter
Join Date: Apr 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
TB adapter for LS6 Intake Swap slowly getting together all the parts needed for an LS6 intake swap. The running plan is to use the stock ls4 throttle body and MAF however I need a throttle body adapter
Can anyone point me in the right direction for a TB adapter solution? I read the typical go to on the forum no longer makes them
Can anyone point me in the right direction for a TB adapter solution? I read the typical go to on the forum no longer makes them
07-06-2018, 10:05 AM
#3
Teching In
Thread Starter
Join Date: Apr 2018
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Yes, I’ve checked good old eBay nothing is out there. Closest thing I found was an adapter mounting an ls4 intake to a ls1 throttle body which is the reverse of what I’m trying to do and I don’t think it will work
alternative option is going with a drive by wire ls1 throttle body and likely a different MAF but that could be another set of challenges in its own right
alternative option is going with a drive by wire ls1 throttle body and likely a different MAF but that could be another set of challenges in its own right
