intake manifold gasket and part #
intake manifold gasket and part # I ordered the fel pro part number (MS96587) that autozone, advance, and rock auto list on their website for our motor. Unfortunately it is not the right gasket set for the intake manifold. The part number is wrong at all of them. I believe they are referencing the truck motor intake manifold gasket as the gasket is on a plastic bracket that somehow mounts to the manifold.
Now our actual gasket are 8 seperate rubber gaskets that fit into a groove on the intake manifold. Does anybody know the correct fel pro part # for us?
Or are they reusable?
Now our actual gasket are 8 seperate rubber gaskets that fit into a groove on the intake manifold. Does anybody know the correct fel pro part # for us?
Or are they reusable?
Sorry to be the bearer of bad news but most likely you'll have to go dealer on those gaskets. I would recommend replacing them. But, if they are in good shape when you removed the intake you can wipe them off and try to reuse them. Make sure you torque the intake down to factory specs. That is critical in making the gaskets seal properly and not squish out or flatten.
