Ported Fast 90
I have a ported fast 90 that I had on my caddy. Going with a maggie so this can go. I do not know who ported it as I bought it used. I did pull it apart when I received it to take a look around inside and it looks good. No mess ups or patches anywhere. It has fairly new intake gaskets installed and I put a new gasket in between the top and bottom half's and RTV'd it back together so there would be no leaks. The intake was sanded down and painted black for a stealth kind of look (again, previous owner). Comes with all stainless hardware and the Fast valley cover bolts everybody seems to forget about.
$750 plus shipping.
I'll have pics up by tomorrow.
$750 plus shipping.
I'll have pics up by tomorrow.
My bump for the day and some more info.
I forgot to mention that it comes with stock fuel rails and stock injectors as well as a set of 42 pph injectors. The injectors are kind of a wierd deal. I bought them from a guy on ebay and they are basically a stock bosch type injector that has had the holes enlarged by a laser drill. I had the flow sheet for the injectors but I dont know where it went. I bought them from a guy named John and this should be his number if anybody wants to talk to him about them. 1-770-842-0882. His shop is in Georgia.
I had them on my car but the car wouldn't run on a stock tune so I pulled them just to drive it until I could get it tuned and that never happened so they have less than a gallon of fuel through them since I bought them. The guy painted them with regular paint and it has peeled on one but I will clean them up and make them look god before they leave my door.
No throttle body or map sensor included. Everything else goes. I do have more hardware as well as the stainless fuel rail bolts. The silver fuel line that runs across the top will need spacers under the mounts to mount securely. I dont have the spacers.
And everything is a little dirty. Its been sitting for a few months. I'll clean everything up before it leave my door.






I forgot to mention that it comes with stock fuel rails and stock injectors as well as a set of 42 pph injectors. The injectors are kind of a wierd deal. I bought them from a guy on ebay and they are basically a stock bosch type injector that has had the holes enlarged by a laser drill. I had the flow sheet for the injectors but I dont know where it went. I bought them from a guy named John and this should be his number if anybody wants to talk to him about them. 1-770-842-0882. His shop is in Georgia.
I had them on my car but the car wouldn't run on a stock tune so I pulled them just to drive it until I could get it tuned and that never happened so they have less than a gallon of fuel through them since I bought them. The guy painted them with regular paint and it has peeled on one but I will clean them up and make them look god before they leave my door.
No throttle body or map sensor included. Everything else goes. I do have more hardware as well as the stainless fuel rail bolts. The silver fuel line that runs across the top will need spacers under the mounts to mount securely. I dont have the spacers.
And everything is a little dirty. Its been sitting for a few months. I'll clean everything up before it leave my door.






Last edited by raven154; Jan 7, 2009 at 01:10 PM.





