421 Solid Roller Iron Block Complete
Thread Starter
10 Second Club + 14 Second Truck Club
iTrader: (3)
Joined: Nov 2003
Posts: 493
Likes: 0
From: Ne Pa
421 Solid Roller Iron Block Complete Looks like I'm going to be selling the car, checking for interest in this.
421 Solid Roller
Motor is complete Pan to Intake, still in car and can hear it run.
This setup made 608 RWHP in my 2001 T/A. This was made on 93 octane pump gas
There is approximately 700 miles on the motor.
All machine work and assembly done by Jensen Engine Technologies, Nescopeck Pa.
GM 6.0 Block .030 over
Lunati 4.125 Crank
Lunati Pro Billet Rods
Diamond Nitrous Pistons w/ Moly coated skirts and Ceramic Tops
Tool Steel Wrist Pins
Hellfire rings
12.65:1 CR
Comp Solid Roller Cam 260/266 .673/.673 112LSA
Cloys Hex-A-Just Double Roller Timing Set
Rapid Motorsports Ported Oil Pump
Cometic MLS Steel Head Gaskets
ARP Main Studs
ARP Head Studs
Comp Cams Endure-X Link Bar Solid Roller Lifters
Comp Cams Chromoly 3/8” Pushrods
ET Performance 255cc 11° heads w/
• 2.1” SS intake valves
• 1.6 SS exhaust valves
• 55° Seat option
• PSI CT1043XL Dual 1.58” Valve Springs / .700” max lift
Jesel J2K Roller Shaft Rockers
Beck Sheet Metal Intake Manifold w/ FAST 90mm Throttle Body
Manifold has nitrous bungs welded in for Direct Port Setup.
$15,200.00
421 Solid Roller
Motor is complete Pan to Intake, still in car and can hear it run.
This setup made 608 RWHP in my 2001 T/A. This was made on 93 octane pump gas
There is approximately 700 miles on the motor.
All machine work and assembly done by Jensen Engine Technologies, Nescopeck Pa.
GM 6.0 Block .030 over
Lunati 4.125 Crank
Lunati Pro Billet Rods
Diamond Nitrous Pistons w/ Moly coated skirts and Ceramic Tops
Tool Steel Wrist Pins
Hellfire rings
12.65:1 CR
Comp Solid Roller Cam 260/266 .673/.673 112LSA
Cloys Hex-A-Just Double Roller Timing Set
Rapid Motorsports Ported Oil Pump
Cometic MLS Steel Head Gaskets
ARP Main Studs
ARP Head Studs
Comp Cams Endure-X Link Bar Solid Roller Lifters
Comp Cams Chromoly 3/8” Pushrods
ET Performance 255cc 11° heads w/
• 2.1” SS intake valves
• 1.6 SS exhaust valves
• 55° Seat option
• PSI CT1043XL Dual 1.58” Valve Springs / .700” max lift
Jesel J2K Roller Shaft Rockers
Beck Sheet Metal Intake Manifold w/ FAST 90mm Throttle Body
Manifold has nitrous bungs welded in for Direct Port Setup.
$15,200.00
Last edited by antz01ta; Jun 8, 2009 at 02:11 PM.
