ARE Stage 2 heads
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Aug 2002
Posts: 1,243
Likes: 0
From: Colorado Springs
ARE Stage 2 heads ARE Stage 2 Series
Angle Valve Job
Manley Stainless Steel 2.02 / 1.57 Valves
Comp Cams / Manley Double Valve Springs
Titanium Retainers
Full Competition Port and Polish Intake / Exhaust Ports
CC Combustion Chambers
Radius Exhaust Seats
Bronze Guide Liners
Hot Tank and Thoroughly Inspect Cylinder Heads
Viton Valve Seals
Resurface Heads to Desired Compression and Set Combustion Chamber CC
Set all Valve Spring Pressures and Heights
Fully Assembled and Ready to Bolt on
Flow Test with Printout
Used on Bore Sizes 3.90” - 4.00"
Springs Good up to .650” Lift
Heads are disassembled. Excellent condition. Springs..retainers..etc are included.
$850 + 1/2 shipping...no core required.
Angle Valve Job
Manley Stainless Steel 2.02 / 1.57 Valves
Comp Cams / Manley Double Valve Springs
Titanium Retainers
Full Competition Port and Polish Intake / Exhaust Ports
CC Combustion Chambers
Radius Exhaust Seats
Bronze Guide Liners
Hot Tank and Thoroughly Inspect Cylinder Heads
Viton Valve Seals
Resurface Heads to Desired Compression and Set Combustion Chamber CC
Set all Valve Spring Pressures and Heights
Fully Assembled and Ready to Bolt on
Flow Test with Printout
Used on Bore Sizes 3.90” - 4.00"
Springs Good up to .650” Lift
Heads are disassembled. Excellent condition. Springs..retainers..etc are included.
$850 + 1/2 shipping...no core required.
Last edited by MECHAM; Mar 16, 2005 at 12:28 PM.
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Aug 2002
Posts: 1,243
Likes: 0
From: Colorado Springs
Originally Posted by Lostpatrolman
Do you have any flow numbers on the heads? What type of heads are these, what year?
should flow close to 280-290ish @ 600
