get boosted with procharger package
I am going to buy some kooks 1 7/8 long tube headers, custom X pipe and 18 inch sweet thunder mufflers dumped before the axle. Ill also have a good set of low compression heads if i can find some, and a fast 90/90 setup. Should flow good. What pulley would get me to 10 and 14psi?
I believe a 7.5 crank pulley and a 3.7 ??? blower pulley will set you right at 12.5#'s max boost. Your exhaust sounds like its gonna flow good. I wouldn't (personally) "waste" the money on the fast 90/90. Either run a carb style Edelbrock Vic Jr intake and elbow w/ a 90mm TB or keep the stock intake. As fas as heads, throw some 6.0 heads on there with some Comp918 springs and your compression will be right at 9.0:1. And according to your sig, you already have the forged motor so you should be good to go!
Any other Q's....shoot me a PM. I will be glad to try and help.
Good luck
Andy
Any other Q's....shoot me a PM. I will be glad to try and help.
Good luck
Andy
Originally Posted by SScottie
how much for just the procharger kit without hp tuners, mac ypipe, extra mafs & gauge
Andy
I am interested but am not ready to buy jsut yet..... I got quote $7,500 installed and tuned with walbro pump, other fuel stuff, 42 lb injectors for d1sc 8 rib unit.. So i figure if i bought this for $4,500 id need injectors, fuel set up, gauges so about $5,500 plus install and tune were at $7000 and that not even the 8 rib set up........ Any way you can go a ltitle lower on the price? pm with what you think and someone chime in if i added this up wrong. thanks
__________________

Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed

Featuring 6 different turbo kits for your F-body!
Check us out on Facebook at: www.facebook.com/HuronSpeed
11 Second Club
iTrader: (1)
Joined: Jun 2004
Posts: 655
Likes: 0
From: In a van down by the river, Missouri
Originally Posted by SScottie
how much for just the procharger kit without hp tuners, mac ypipe, extra mafs & gauge


