FS: NX Switch Panel + Harness (New)
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 100
Likes: 0
From: Arizona
FS: NX Switch Panel + Harness (New) Hey all,
I found these parts that I never used, I sold my Nitrous kit before installing it in my car.
This is a standard NX 3 switch Panel, with a custom harness that makes it nice, neat and just about as plug and play as it can get. Including wiring instructions.
It's all pre-wired up for a complete system, with weatherpack connections. This harness is more than long enough for a F-Body or Corvette. I asked the person that produced the harness to add an extra two feet to the overall length of his standard F-Body harness, just to be sure.
The Connections at the back of the harness are pre-wired and hooked up to the switches for Bottle Opener, Relays for the Gen X-2 kit, Grounds, Pressure Switch, and Bottle Heater.
I bought the harness from someone that builds them on one of the messageboards(might have been here) for something like $60, the switches run about $55 online.
I'm asking $75 for everything shipped.
PM or Email me if interested.
In the bag on the right is some extra T's, more of the cable covering material, and some weatherpack connectors, incase you want to reconfigure it some for your application.
I found these parts that I never used, I sold my Nitrous kit before installing it in my car.
This is a standard NX 3 switch Panel, with a custom harness that makes it nice, neat and just about as plug and play as it can get. Including wiring instructions.
It's all pre-wired up for a complete system, with weatherpack connections. This harness is more than long enough for a F-Body or Corvette. I asked the person that produced the harness to add an extra two feet to the overall length of his standard F-Body harness, just to be sure.
The Connections at the back of the harness are pre-wired and hooked up to the switches for Bottle Opener, Relays for the Gen X-2 kit, Grounds, Pressure Switch, and Bottle Heater.
I bought the harness from someone that builds them on one of the messageboards(might have been here) for something like $60, the switches run about $55 online.
I'm asking $75 for everything shipped.
PM or Email me if interested.
In the bag on the right is some extra T's, more of the cable covering material, and some weatherpack connectors, incase you want to reconfigure it some for your application.
Last edited by HalfMoon; May 12, 2006 at 09:24 PM.
Thread Starter
On The Tree
Joined: Nov 2001
Posts: 100
Likes: 0
From: Arizona
Originally Posted by Shinsetsu
diagram?
I do have the instructions that came with the harness that tell you where the color coded wires go. From my memory the NX kit booklet has some diagrams if you need more than "Connect orange wire to ... Connect red wire to...". The weatherpack connections that are at the end of the harness connect with the connectors NX uses for the heater, bottle opener, etc.