F/S AFR 225 solid roller setup
F/S AFR 225 solid roller setup Price reduced!!
Selling my solid roller setup which has less than 1000 mi and some dyno time on it. Also have all the original recipts for the parts that i will include. Most of the parts were bought directly from tony at AFR.
F/S AFR 225 heads part# X1630F Milled to 70cc heads are setup for a solid roller With comp cams 917 spring 1.550 od with titanium retainers pockets were cut for the larger dia springs. less than 1000 mi on em. $2150.00
F/S comp cams grind part# 54-000-11 solid roller cam $250.00 same as above on useage
gross lift
int 661
ex 668
-dur at .050-
int 254
ex 260
LSA 114
F/S crower severe duty solid lifter with hi press pin oiling part# 66278h-16 same as above for useage $350.00
I am going to keep my crane rockers but i will include the pushrods for free if someone buys the whole setup! Pushrods are manly 5/16 x 8.0 ,4130 swedged end .080 wall
All the parts are still installed on the car i can get a vid of it running but just dont know how to post em
i will get pics of the parts you can see on a running car. I can pull the parts this weekend or at anytime If you have any questions feel free to call me.Ron from vengeance can vouch for the setup.
Make me a offer
Dan johnson 478-396-5571
Selling my solid roller setup which has less than 1000 mi and some dyno time on it. Also have all the original recipts for the parts that i will include. Most of the parts were bought directly from tony at AFR.
F/S AFR 225 heads part# X1630F Milled to 70cc heads are setup for a solid roller With comp cams 917 spring 1.550 od with titanium retainers pockets were cut for the larger dia springs. less than 1000 mi on em. $2150.00
F/S comp cams grind part# 54-000-11 solid roller cam $250.00 same as above on useage
gross lift
int 661
ex 668
-dur at .050-
int 254
ex 260
LSA 114
F/S crower severe duty solid lifter with hi press pin oiling part# 66278h-16 same as above for useage $350.00
I am going to keep my crane rockers but i will include the pushrods for free if someone buys the whole setup! Pushrods are manly 5/16 x 8.0 ,4130 swedged end .080 wall
All the parts are still installed on the car i can get a vid of it running but just dont know how to post em
i will get pics of the parts you can see on a running car. I can pull the parts this weekend or at anytime If you have any questions feel free to call me.Ron from vengeance can vouch for the setup.Make me a offer
Dan johnson 478-396-5571
Last edited by chevydan; Jul 19, 2007 at 09:50 AM.
