how can I run 10's?
Thread Starter
Teching In
Joined: Dec 2002
Posts: 31
Likes: 0
From: Knoxville,Tn.
how can I run 10's? I have a 94 forumla with a MTI heads, a cc306 cam, hooker long tubes, mufflex 4 inch,tnt set@150, 28x10.5 et drags, M6, 9 inch with 4.10's. Will it go 10's, or not?
Re: how can I run 10's?
I ran out of rpm. had to go into neutral.I really want to go 10's on a stock short block. Is this feasable?
I would think that would be about perfect for H,C,I and the spray
I would think that N/A U could run a 4.56 on that tire
tell us more please,what gear where you in at the traps and RPM?
On The Tree
Joined: Nov 2002
Posts: 183
Likes: 0
From: DE
Re: how can I run 10's? well,im running 11.022@124 with a stock LONGBLOCK.
so 10's on the stock shortblock should not be an issue. many guys have gone with 10's with heads/cam/power adder.
im not sure how many guys have gone 10's with a stock longblock,but im sure as heck gonna be 1 of em.
so 10's on the stock shortblock should not be an issue. many guys have gone with 10's with heads/cam/power adder.
im not sure how many guys have gone 10's with a stock longblock,but im sure as heck gonna be 1 of em.
Thread Starter
Teching In
Joined: Dec 2002
Posts: 31
Likes: 0
From: Knoxville,Tn.
Re: how can I run 10's? The 28's are a new purchase. The times were on 26x11.5x16 et streets. 4th gear, shifting some where near 6200. Gonna try for tens at Bowling green on the 20th. The cage is done, so I should be legal
