LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Starting problems

Thread Tools
 
Search this Thread
 
Old Mar 3, 2009 | 07:45 PM
  #1  
alconk's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Dec 2003
Posts: 372
Likes: 1
Default Starting problems

I have a 94 SS clone with 168K miles on it with many mods from LTs to cam and rear gears. I have had no trouble with this car for the last 5 or so years of ownership except fuel pump and Opti. Lately when I start it for the first time of the day it fires before I can even release the key but after I have driven it and go to restart it just doesn't want to start. This can vary from 10 minutes to 8 hours later. But if I depress the accelerator just a bit it will finally start..... I have no codes. Other than that nothing else. Any ideas????
Reply
Old Mar 3, 2009 | 07:52 PM
  #2  
lifeisgood's Avatar
11 Second Club
iTrader: (4)
 
Joined: Oct 2006
Posts: 1,029
Likes: 0
From: ky
Default

fuel filter?get a fuel gauge on this thing and look at it while cranking
Reply
Old Mar 3, 2009 | 07:56 PM
  #3  
alconk's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Dec 2003
Posts: 372
Likes: 1
Default

I have a Autometer fuel gauge and cranking it's about 40 psi. Fuel filter has about 5K miles on it.
Reply
Old Mar 3, 2009 | 08:09 PM
  #4  
RamAir95TA's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: May 2005
Posts: 9,467
Likes: 8
From: South Jersey
Default

Sounds like another case of classic ICM heatsoak failure.
Reply
Old Mar 3, 2009 | 10:06 PM
  #5  
alconk's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Dec 2003
Posts: 372
Likes: 1
Default

Originally Posted by RamAir95TA
Sounds like another case of classic ICM heatsoak failure.
What does ICM stand for and hours later???? I'm sure it had completely cooled down by then.
Reply
Old Mar 3, 2009 | 10:14 PM
  #6  
AChotrod's Avatar
11 Second Club
iTrader: (17)
 
Joined: Jul 2008
Posts: 9,896
Likes: 1
From: Chicago area
Default

what exactly happens when it doesnt start? Nothing, Just a click or does it turn over and just doesnt start?
Reply
Old Mar 4, 2009 | 07:19 PM
  #7  
alconk's Avatar
Thread Starter
TECH Apprentice
iTrader: (1)
 
Joined: Dec 2003
Posts: 372
Likes: 1
Default

Originally Posted by AChotrod
what exactly happens when it doesnt start? Nothing, Just a click or does it turn over and just doesnt start?
It just cranks and acts like it wants to start and it will eventually but if you just depress the accelerator it fires right up??
Reply




All times are GMT -5. The time now is 02:09 AM.