tpi 58mm tb on lt1
03-07-2009, 03:59 AM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jul 2007
Location: pacifica ca
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
tpi 58mm tb on lt1 ok i have a lingenfelter 58mm tb that i wanna put on my lt1 but the tps is off a tpi motor is there a way to wire up the tps off the tpi motor to the lt1 harness? some one please help i have heard it can be done. i wanna know how to wire it up if possible thanks
lt1 version
the tpi sensor or harness
on the lt1 intake
lt1 version
the tpi sensor or harness
on the lt1 intake
03-07-2009, 08:39 AM
#4
On The Tree
Thread Starter
iTrader: (3)
Join Date: Jul 2007
Location: pacifica ca
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
no i tryed that already lol the sensor is different and alot bigger. the thing i wanna do is just wire up that tps sensor to my lt1 tps harness i have on the car
03-07-2009, 09:48 AM
#5
Village Troll 
iTrader: (2)
You are going to have to cut your tps wires and solder the new connector on and use the adjustable sensor. The wires I believe are color coded. If they aren't then call LPE and ask...
Make sure to use shrink wrap as well.
Make sure to use shrink wrap as well.
