LT1-LT4 Modifications 1993-97 Gen II Small Block V8

need help on msd opti

Thread Tools
 
Search this Thread
 
Old 12-23-2009, 03:41 PM
  #21  
Teching In
Thread Starter
 
black93camaro's Avatar
 
Join Date: Dec 2009
Location: annapolis md
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks for all the help. Now it once started it sounds perfect except that it doesn't want to idle. It will rev up just fine but once you let go of the throttle it kills itself. i adjusted the idle some and brought it up but that didnt help. you think the TPS or the IAC is bad?
Old 12-23-2009, 03:44 PM
  #22  
TECH Addict
iTrader: (18)
 
Badazz 97 TA's Avatar
 
Join Date: Aug 2007
Location: Arizona
Posts: 2,171
Likes: 0
Received 1 Like on 1 Post

Default

sounds like you still installed it wrong. Did it run fine before you touched it?
Old 12-23-2009, 04:47 PM
  #23  
TECH Veteran
iTrader: (246)
 
robsquikz28's Avatar
 
Join Date: Mar 2008
Location: Chicago/Crown point
Posts: 4,987
Received 0 Likes on 0 Posts

Default

Did the car ever run before this MSD was installed? Or is this the first time its ever started and you have this issue?
Old 12-24-2009, 01:08 PM
  #24  
Teching In
Thread Starter
 
black93camaro's Avatar
 
Join Date: Dec 2009
Location: annapolis md
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

its the first time having msd on this car. it ran fine with the old opti.
Old 01-11-2010, 04:18 PM
  #25  
Teching In
Thread Starter
 
black93camaro's Avatar
 
Join Date: Dec 2009
Location: annapolis md
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default

it turns out it was installed right but i had a bad coolant temp sensor. that one little sensor controls just about everything having to do with fuel/air ratio, advancing/retarding of the timing and idle.



Quick Reply: need help on msd opti



All times are GMT -5. The time now is 03:11 AM.