need help with nsa rocker setup
need help with nsa rocker setup need help with nsa rocker setup going with 7/16 rocker studs 1.6 rockers guide plates hardened pushrods was wondering what brands to buy and what part numbers. ive heared some rockers dont work so i want to get this right input please
pro mag rockers, pro mag pushrods, gm guide plates..if its cam only car or the heads are like stock or havent been milled too much they should be 7.200 lenght. but always check the lenght anyways.
Trending Topics
TECH Regular
Joined: Apr 2007
Posts: 420
Likes: 0
From: Kempner, TX
Many guys complain about Pro Mags and Crane Golds being so noisey. I see this on every of the 8 or so Forums I visit.
Scorpions are quiet as stock and I have them on my 388 LT1 and recently installed a set on my son's 96 LT1 Vette engine.
If you don't mind the noise, then go for it.
Jake
Scorpions are quiet as stock and I have them on my 388 LT1 and recently installed a set on my son's 96 LT1 Vette engine.
If you don't mind the noise, then go for it.
Jake
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo ummm on mine they sound like an out of adjustment rocker kinda. id go with isky guide. since LT1 head excepts a screw in 7/16 stud there is no reason not to go with a 7/16 arp stud and a comp cam pro mag 1305-16. i made the mistake of not know i could go 7/16 its the same price so just go stronger
comp pro mag 1.6 rr #1305-16
7/16 ARP studs #134-7103
Trickflow Guide Plates #30400623-8
i used Trickflow hardened pushrods. These i can not give you a part number for due to my heads being milled and .026 gaskets so my length is different
optional parts if needed:
LS7 lifters (now OEM replacement for LT1) #12499225
Comp pushrod check tool #7702-1
7/16 ARP studs #134-7103
Trickflow Guide Plates #30400623-8
i used Trickflow hardened pushrods. These i can not give you a part number for due to my heads being milled and .026 gaskets so my length is different
optional parts if needed:
LS7 lifters (now OEM replacement for LT1) #12499225
Comp pushrod check tool #7702-1
pro mags are the best/strongest. havent had personal experience with scorpians but heard only good things. alota people talk **** on pro forms but my buddies got a 406 sbc in an s10 and it has them no problems lots of hardddd driving and theyre quiet.
^^^ believe they are 275-280 range new...i always see used ones on the sale sec. here for bout 150.00-200.00 range. scorpions are a good set as well i believe they are 180-190 new.
TECH Regular
Joined: Apr 2007
Posts: 420
Likes: 0
From: Kempner, TX
