i recently had pacesetter LTs installed w/ory and magna flow cat back very expensive by the way 1100 in labor for install plus new 02s cause they did not want to come out of stock manifolds another $240.$1600 in parts that i bought whole exhaust msd wires percys header bolts wire protectors o2 extensions and my question is i have a very bad y pipe vibe on floor board under very light accel of the throttle i was told by the mechanic solid motor mounts would take care of it...or he would have todo extensive heating and bending of my new y and my drivers side header which by the way i paid xtra for ceramic coating which i dont want ruined is that right would solids fix that i am not concerned about vibration at idle just want to stomp on it ...also since the install my security light is on wont let me start the car light comes on when i open drivers door no blinkin just on ..does not turn over neither i disconnect the battery then start it but has happened a few times and also my low oil light is on but not low on oil all since install any ideas

 

Did you have your motor mounts replaced? If not, changing them to the poly mounts should help with your y pipe clearance.

 

you got ripped off paying 1100 in labor, your mechanic is an idiot for telling you to run solid motor mounts, and if the **** worked before you brought it to him then take it to him to fix it for free. you DID pay 1100 in labor.

 

Holy ****..$1100..

I would take it back to him, make him fix everything, detail it, wax it, and somewhere in there you should get a BJ..

Sounds like one of the wires is crossed or he didn't hook something back up correctly.

I hate people that charge an arm n a leg for simple stuff on these cars. Where abouts are you in upstate NY? I'm originally from there..

 

That's a helluva sentence. I never priced a header and exhaust install, but 1100 sounds like a lot. I wonder if that guy is hiring.

 

I got a quote the other day to do just the header install not the pipes at $130

 

No shop would install headers on a 4th gen f body for $130... unless the motor was sitting infront of them, and they didnt have to put it back in. hah. They will change their quote when they see it im sure.

 

damn did they give u some vaseline with the install? if not then u got fucked hard!

 

I got a quote locally for $150...

 

tHEN THAT is the stupidest ****** shop around. THat price is such a understatement. **** he will probably rob you and make a copy of your key and then steal the car a week later. At that price its like the shop is only working for $40 an hour. lol

 

The collector could be in contact with the transmission cross brace. If that is the case then you can grind the cross brace enough to clear. As far as the oil light it's either disconnected or was carelessly routed and the wires could be burnt. Not sure about security light, but wouldn't doubt wires there are burnt as well. You need to carefully look at your header primaries and collectors to see if there are any wires touching and examine them. No wire should touch any part of the exhaust.

 

Those cheap quotes involve a lift and a sawzaw, they just cut the pipes, cats what ever out of the way to gain room to get to the old crap and they keep the cats and pipe. They can have the old **** out in about 20 to 30 min . Headers back in in 30min with no egr hook ups, no cats and all you supply all the pre bent pipes and clamps. headers with egr would be more. It is a fun project for a mechanic. But you have to have ALL of the parts you need to install them. if your missing clamps or O2 extensions or bolts the price will go up very fast as they charge you for lift time untill they find the parts. And if you have a canton or moroso oil pan it will be about 5 times that amount.

 

I have been wrong before, but i cannot see ANY shop doing header install on these cars for $150.. thats absurd if you ask me.

 

i just got my headers put on PS long tubes and ory, and i guarantee you no shop is going to do it for 150. OP: you def got ripped off if you paid $1100 to install headers, and your having problems. you should take it back and have him fix all the issues your having for free and if you have any issues in the future he should fix it for free as well.

 

no i didnt i am gonna replace them with solids i want no rocking at all from my motor

 

Wow 1100 for headers install & catback install.... this guy must have money growing out his ***. a usual quote for lt1 install is around $500

 

thanks lol my total bill was $4100 it had issues after the install of exhaust ended up being my feul pump was the problem everything they did except the welding i could of done for a third of the price it makes me sick to my stomach every time i look at my bill $2500 from them $1600 i paid for the parts threw ebay and summit $650 for the pump after i gave them the ok to cut out a access panel in my hatch "to save me labor costs"i have been in northern va for work no place to do repairs myself and exhaust so i opted to pay big mistake should of waited there went all the extra money i earned plus lol

 

u have fun with that

 

i priced 3 diff shops all around the same i opted for this shop for a lil more because they are a craftsman shop and guarnteed thier work i am also in northern va 23 miles out of d.c. cause of work! everything here is outrageous

 

Sounds like everything is outrageous there!! you def should have waited till you were back with them having these ripoff prices there.