388 head gasket will this work?
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts
388 head gasket will this work?
I need to get gaskets and want to make sure this will work? 200 shot or more of spray and need to know if this will work.
http://www.summitracing.com/parts/SCE-S11064LT/
http://www.summitracing.com/parts/SCE-S11064LT/
#4
Launching!
iTrader: (3)
Join Date: Jul 2007
Location: Greenville, WI
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Do those have the stainless fire ring molded in? Or do they require o-ringed heads / block? If they have the molded in ring, I had the problem of the ring not staying outside the valve pockets (thats on a 383 with LT4 head) . The ring would hang into the combustion chamber and not get properly squished when the heads were bolted on. Note the bore shape of a conventional gasket. http://www.summitracing.com/parts/FPP-1074/?rtype=10 Just make sure that round bore is big enough to stay outside the valve pockets.
Last edited by tonskiguy; 05-13-2010 at 09:07 PM.
#5
TECH Regular
Join Date: Apr 2007
Location: Kempner, TX
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
I gave up on copper gaskets years ago; sealing problems. I may have gotten better results by "O" ringing the block, but I just don't trust the copper versions.
Jake
Jake
#6
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Jul 2009
Posts: 360
Likes: 0
Received 0 Likes
on
0 Posts