Guys with Lokar throttle cables in here please

Reply Subscribe

Thread Tools

Search this Thread

Jun 1, 2010 | 07:24 PM

FASTFATBOY

Thread Starter

TECH Veteran

iTrader: (23)

Joined: Nov 2002

Posts: 4,861

Likes: 2

From: Mobile Ala

Guys with Lokar throttle cables in here please

How did you hook up the pedal end? Did you drill the pedal?

Or

Did you cut the stock cable, slide off the little deal that locks into the pedal and slide it on the Lokar cable?

Jun 1, 2010 | 09:26 PM

Speed Density

hashtagBMW

iTrader: (38)

Joined: Jul 2005

Posts: 6,572

Likes: 2

From: Boise, Idaho

It has that peice that slips through the pedal end and then I used the a metal tie to hold it on. That with tension keeps it snug.

Jun 2, 2010 | 01:32 AM

Tensec94z

Staging Lane

iTrader: (1)

Joined: Mar 2009

Posts: 81

Likes: 0

From: Your Mom's House

cable

I just pulled the piece off the stock cable and installed it on the Lokar cable,and yes you have to use fender washers on the firewall.

Jun 2, 2010 | 01:56 AM

Speed Density

hashtagBMW

iTrader: (38)

Joined: Jul 2005

Posts: 6,572

Likes: 2

From: Boise, Idaho

Ill get you a picture tommorow if I remember.

Jun 2, 2010 | 07:58 AM

Tapout911

Launching!

iTrader: (9)

Joined: May 2006

Posts: 212

Likes: 0

From: Paragould AR

I used the red piece off the stock cable and put washers on the firewall. Never had any issues.

Jun 2, 2010 | 08:55 AM

FASTFATBOY

Thread Starter

TECH Veteran

iTrader: (23)

Joined: Nov 2002

Posts: 4,861

Likes: 2

From: Mobile Ala

Quote:

Originally Posted by tapout911

i used the red piece off the stock cable and put washers on the firewall. Never had any issues.

how close are you to being back together?

Jun 2, 2010 | 03:41 PM

quik95lt1

9 Second Club

iTrader: (7)

Joined: Dec 2008

Posts: 4,464

Likes: 12

From: Rhode Island

Quote:

Originally Posted by FASTFATBOY

How did you hook up the pedal end? Did you drill the pedal?

Or

Did you cut the stock cable, slide off the little deal that locks into the pedal and slide it on the Lokar cable?

yea i just cut the stocker right off the pedal and re-used that little black retainer piece in the pedal....then i just cut off the end of the lokar cable slid it through the retainer and put a barrel end with a set screw on the other side to hold it.....pretty simple.......hope this helps