Header Install Pics?
Header Install Pics? Ok guys, looks like the ASM and RKs are out as after further research the plug access is horrible and that's not going to help my case. Well now onto the long tube option. Do you guys have any pics of LPPs, Pacesetters, and Kooks installed on lowered cars. I'm running the Eibach Pro kit and wanna see the install height and available ground clearance with either one of these. Also, some people are saying good things about TPIS and JettHots and pics of these would be nice. Feel free to toss any install issues and likes/dislikes of these headers.
My LPP's sit very close like SOX pic above. Change the engine mounts and check the clearance at the intermediate shaft and on the back side of the K member where the pipes come down. These 2 spots seem to cause the most problems but new polly engine mounts usually help this problem. Stock engine mount on the driver side like to flatten out so you end up having clearance problems at the intermediate shaft and the K member. some headers like to relax after several heat cycles and then you will have a rub on the k member. Not all do this but my LPP's did but they are on like the 3rd or 4th generation of those now so I can only speak from experience with my gen 1 or 2's.
Yeah, I had pretty much taken Hookers out of consideration due to the flange connections. Gonna have to stick with slip fit due to ground clearance as you mentioned. I've also been recommended to take a look at the TPIS headers anyone wanna chime in on those?
My LPP's sit very close like SOX pic above. Change the engine mounts and check the clearance at the intermediate shaft and on the back side of the K member where the pipes come down. These 2 spots seem to cause the most problems but new polly engine mounts usually help this problem. Stock engine mount on the driver side like to flatten out so you end up having clearance problems at the intermediate shaft and the K member. some headers like to relax after several heat cycles and then you will have a rub on the k member. Not all do this but my LPP's did but they are on like the 3rd or 4th generation of those now so I can only speak from experience with my gen 1 or 2's.
Just wish someone made a good mid that had decent plug access for the LT1 but I guess I'm gonna have to go the LT route if I want this feature.
There is... Mac makes a nice mid length header. i still have my old ones that i took off when i went to LT's.. there plug access was great and there fitment was excellent...
Trending Topics
Tiny primaries and need to step up flow thu 1-3/4" with these heads and cam. This is why MACs have always been off my list.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Staging Lane
Joined: Jul 2009
Posts: 88
Likes: 0
From: Perry,GA
I dont have any pics at the moment but Ill try to get some up tonight. I just got a set of the ebay pacesetter knockoffs put on and I have the prokit also. BTW, the fitment of the headers are great. Pretty good plug access, blah, blah, blah. . . . .
I have painted ps as well. the clearance is great, The y pipe on the other hand hangs a little but not low enough i have to worry about speed bumps or anything. But i swear they were the biggest PITA trying to get them on. i have put LT on alot of LT1 cars but for some reason mine were the biggest problem.
TECH Fanatic
Joined: Nov 2007
Posts: 1,745
Likes: 18
From: Lansing, MI via Bowling Green, KY, Dalton GA, Nashville, TN & Atlanta, GA
Aside from being cheap, I don't know much about Pacesetters, but I would be willing to bet that Kooks clearance is a bit better.
Hey:
For the hassles it takes with some cars go stainless. Stainless runs cooler than painted steel and you can coat them and make them even cooler yet for awhile. Go either with the ebay PS stainless clones eworld sales, or the LPP or LPP clones from ebay. The price is similar to PS but gives Kooks type perf, How can you go wrong for the price. Also it is not that the headers fit differently on the cars, it the cars have treaked more on some than others. If you don't have subframe cons and supporting upgrades in various spots in the car they twist alot, they just do. when you have a car thats lowered you need a set of headers that give or maintain your present clearance. The LPPs and LPP clones give Kooks type clearance which tuck up very close to the body thats why they seem to have more install problems than other types as they don't have as much room to play with as other headers that hang a little lower. My Car with LPPs is lowered 1 3/4" and I don't have any more problems with clearance than I had stock or with Kooks. The pacesetter ORY is where I had clearance issues that the LPPs, LPP clones and Kooks don't have. When I had the PSs on I hit alot of places, never on the headers always on the ORY, and is one of the reasons on why I changed them out, just to let you know.
Good luck with whatever you decide....
Dub
When In Doubt Do Without
For the hassles it takes with some cars go stainless. Stainless runs cooler than painted steel and you can coat them and make them even cooler yet for awhile. Go either with the ebay PS stainless clones eworld sales, or the LPP or LPP clones from ebay. The price is similar to PS but gives Kooks type perf, How can you go wrong for the price. Also it is not that the headers fit differently on the cars, it the cars have treaked more on some than others. If you don't have subframe cons and supporting upgrades in various spots in the car they twist alot, they just do. when you have a car thats lowered you need a set of headers that give or maintain your present clearance. The LPPs and LPP clones give Kooks type clearance which tuck up very close to the body thats why they seem to have more install problems than other types as they don't have as much room to play with as other headers that hang a little lower. My Car with LPPs is lowered 1 3/4" and I don't have any more problems with clearance than I had stock or with Kooks. The pacesetter ORY is where I had clearance issues that the LPPs, LPP clones and Kooks don't have. When I had the PSs on I hit alot of places, never on the headers always on the ORY, and is one of the reasons on why I changed them out, just to let you know.
Good luck with whatever you decide....
Dub
When In Doubt Do Without
Very nice. What's going on inside the garage with the 2nd Gen? Staging Lane
Joined: Jul 2009
Posts: 88
Likes: 0
From: Perry,GA
