catback?
Thread Starter
TECH Apprentice
Joined: Feb 2010
Posts: 319
Likes: 0
catback? i just got a 95 z28. its got stock manifolds and a flowmaster. its def not loud enough. what catback system would be loudest with stock manifolds? and if you have reccomendations for a custom set up with headers i should do let me know.and can you get true dual exhaust on it?
Removing the cat will make it louder and flow a little better. Also, you could get a cutout installed which will bypass the muffler and make it MUCH louder.You can count on a .1 et reduction with an open cutout vs most catback setups.
If you are willing to spend a little more money you could get a custom true dual setup with an x-pipe. This will flow excellent and sound much better than just a cutout or any catback system IMO.
If you are willing to spend a little more money you could get a custom true dual setup with an x-pipe. This will flow excellent and sound much better than just a cutout or any catback system IMO.
TECH Resident
Joined: Sep 2007
Posts: 793
Likes: 0
From: Phoenix,AZ
this is borla catback on my stock everything 94 z28. shitty camera but you get the idea, ill post the vid of the full throttle and the normal acceleration.
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/lubi-LpYe40&hl=en_US&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/lubi-LpYe40&hl=en_US&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/lubi-LpYe40&hl=en_US&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/lubi-LpYe40&hl=en_US&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Trending Topics
TECH Resident
Joined: Sep 2007
Posts: 793
Likes: 0
From: Phoenix,AZ
embedding didnt work but heres the link to the youtube page.
http://www.youtube.com/watch?v=lubi-...os=qrPCWlXF2P8
http://www.youtube.com/watch?v=lubi-...os=qrPCWlXF2P8
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo TECH Resident
Joined: Sep 2007
Posts: 793
Likes: 0
From: Phoenix,AZ
TECH Resident
Joined: Sep 2007
Posts: 793
Likes: 0
From: Phoenix,AZ
here it is just through first gear, not much road where we were at and sorry the camera sucked but its all we had haha
http://www.youtube.com/user/OiSchuyl.../5/oqeHWHSEgB4
http://www.youtube.com/user/OiSchuyl.../5/oqeHWHSEgB4
TECH Resident
Joined: Sep 2007
Posts: 793
Likes: 0
From: Phoenix,AZ
if i remember correctly isnt the gmmg set up around 950? the borla brand new is like 840 or something i believe, i picked mine up off ltxtech for 350 only thing i didnt get was the plates to open and close the right side but i didnt care cause i want it wide open always anyway.
Replace the muffler with a pypes violator muffler. I have long tubes, off road y and magnaflow cat back. I changed out the magnflow b/c I thought it was to quit. I put the violator on and started the car. I ended up going back to the magnaflow b/c thats how much louder it was. Too loud. I could'nt see driving home up my block at night with that thing. If you want loud, there you go
if i remember correctly isnt the gmmg set up around 950? the borla brand new is like 840 or something i believe, i picked mine up off ltxtech for 350 only thing i didnt get was the plates to open and close the right side but i didnt care cause i want it wide open always anyway.
http://www.gmmginc.net/media/Video/ChamberedExhaust.php
http://www.youtube.com/watch?v=3wCVDotlTVQ
http://www.youtube.com/watch?v=zBSC-tLPwXs
(not an LT1 car, but still a great sound clip)
http://www.youtube.com/watch?v=wpkrU-XoxmI
