It's here
#43
Ran 11.58 at 121 on it. Loads of hot lap street racing, bracket racing, ***** out nitrous passes spraying directly off the line etc. It is an awesome clutch. Still feels just as bad *** as the day I put it in. Based on tap speed I'm puttin 550+ through it and it just laughs at it
#44
I hope its exactly how u described it. I tried an xtd and it sucks *** .I disengage my pedal and it feels like it can't Handel the load and that's at 2,500 launch I have to ease off the gas and step on it again wtf.
#45
TECH Enthusiast
keep an eye out for a possible failing throwout bearing. not saying it is gonna happen but just be a little wary. me and a buddy are both running one and his let go one day starting it up. the clutch and pressure plate were fine but the bearing fell apart. maybe it was a freak accident but it happened after about 3k miles. mine has been nothing but phenomonal between daily driving and racing for the $250 i paid.
#46
8 Second Club
iTrader: (18)
keep an eye out for a possible failing throwout bearing. not saying it is gonna happen but just be a little wary. me and a buddy are both running one and his let go one day starting it up. the clutch and pressure plate were fine but the bearing fell apart. maybe it was a freak accident but it happened after about 3k miles. mine has been nothing but phenomonal between daily driving and racing for the $250 i paid.
#47
On The Tree
iTrader: (4)
Join Date: May 2007
Location: Las Vegas, NV..but originally from Oregon!!
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered the stage 2, (part # 4134-2250). I'll post up when I got some miles on it...
its replacing some cheap, chinese 6-puck that has no modulation, that was in the car when i bought it.
its replacing some cheap, chinese 6-puck that has no modulation, that was in the car when i bought it.
#48
TECH Enthusiast
#49
TECH Resident
iTrader: (8)
Join Date: Nov 2008
Location: el paso, tx
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
i think mine has like 1k on it but it grips so hard when you let off its like the car jerks you back....did some fast trans shifting and no fad at all and i'm putting down over 400rwhp. Its the first clutch i had that does what you tell it to do with no problem or back talk lol
#54
TECH Junkie
iTrader: (31)
#55
On The Tree
iTrader: (4)
Join Date: May 2007
Location: Las Vegas, NV..but originally from Oregon!!
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
There's photos in the link provided above by Rudy...
I have put about 100 miles on it so far, and I am impressed. a little bit of chatter on take-off, but it's not even broken in yet, all in all, it drives like a stock clutch. I consider myself hard on clutches, so if anyone is going to abuse this thing, it will be me.........
I have put about 100 miles on it so far, and I am impressed. a little bit of chatter on take-off, but it's not even broken in yet, all in all, it drives like a stock clutch. I consider myself hard on clutches, so if anyone is going to abuse this thing, it will be me.........
#58
TECH Veteran
iTrader: (12)
He said that if the car saw more strip use or massive dumps, the Stage 2.5 would be a better choice. He explained to me that when Kevlar sees normal street driving slippage over time, the linings will be come glazed which might affect grip. He seemed very knowledgable and appears to be steering me toward what I want it to do.
I asked him if the stage 2 would hook and book with a 5K RPM clutch dump and he assured me it would.