. 
My Dyno Video
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Maybe it pushed the gaskets on the dyno ... I doubt he took it to be dynoed knowing the gaskets where toast ...some of you guys never have anything positive to say ...Just dont understand it ..
But there is a lack of info..
400+ threw a 4l60e I wana know who ported the heads and what cam.
Info may have been excluded for a reason ...up here around Detroit theres a pretty large group of street/Grudge racers ...maybe he dont want to tip his hand ...our local track has a street / grudge once a month and its one of thier most popular events each month ...lots of guys around here are vague about thier cars ..
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
Info may have been excluded for a reason ...up here around Detroit theres a pretty large group of street/Grudge racers ...maybe he dont want to tip his hand ...our local track has a street / grudge once a month and its one of thier most popular events each month ...lots of guys around here are vague about thier cars ..
basics of the build include. 355" LT1, stalled 4L60e, Currie 9", EFI 24x LS1 pcm, it does have some Ai parts on it
Sorry that I cant answer all of you guy's questions, I still figured you would enjoy the video... guess not
well i loved the movie bud and who care what others think. they are neg bc they suck. i would not say what i have either if you want to put your money in my pcket thats another story. by the way love the black bird
Thread Starter
TECH Resident
iTrader: (10)
Joined: Oct 2008
Posts: 823
Likes: 0
From: DetroitRacing.com
compression is modest at just over 11.5 static. about 9.2 dynamic. The heads were milled basically as far as you can mill an LT1 head. the chambers are 50.5cc and I have a stock style shitty 4 valve relief piston.
I basically only had to cut the pistons due to the radial relief for the bigger valves. The lift was not really of a concern, but the stock style piston and extremely milled head was what caused problems
I basically only had to cut the pistons due to the radial relief for the bigger valves. The lift was not really of a concern, but the stock style piston and extremely milled head was what caused problems