LT1-LT4 Modifications 1993-97 Gen II Small Block V8

New toys for my 383!

Thread Tools
 
Search this Thread
 
Old Sep 6, 2010 | 05:39 PM
  #1  
355z28's Avatar
Thread Starter
10 Second Club
15 Year Member
iTrader: (8)
 
Joined: Oct 2007
Posts: 1,251
Likes: 4
From: Iowa
Default New toys for my 383!

We'll it was time for the next round of upgrades for the car. I have about 5 race nights on it and I thought it was time to change a couple things.

Recap on the car:
its a 383 LE2 car full weight and full leather interior with the factory bose system AND A/C! lol. 3600 stall and 3.73 gears. and stock suspension other then an adj. pan hard.

I usually run 1/8th mile.
fastest to date is:
7.33@93.5 mph 2500DA 1.59 60ft (best 60' to date as well)

the car usually 60's around 1.62-1.68. I ordered a BMR trans crossmember to relocate an ADJ. BMR torque arm I picked up off of Jason Short earlier this year. Im hoping this will get my in the low 1.5 60' range:




When I built this car, I did build it with nitrous in mind down the road, with the rings ground and the cam on a 112 Its almost time to start a 100 shot. I just picked up a new unused Nitrous outlet plate kit off of Daves94formula and plan on getting it ready for a small shot at the end of this year:




my goal is to get this thing to 7.0-7.1's on motor in good air (1500-2000DA). And I guess we will see what it will do on the bottle!
Reply
Old Sep 8, 2010 | 07:38 PM
  #2  
keeven1320's Avatar
Staging Lane
 
Joined: Jul 2005
Posts: 61
Likes: 0
From: stl
Default

any times with the new parts?
Reply




All times are GMT -5. The time now is 12:24 AM.