Tuning for a converter....OBDI

Reply Subscribe

Thread Tools

Search this Thread

Sep 20, 2010 | 05:17 PM

The LT1 That Could

Thread Starter

12 Second Club

iTrader: (3)

Joined: Dec 2002

Posts: 1,383

Likes: 1

From: Lubbock, TX

Tuning for a converter....OBDI

Okay, so I just sent pcmforless an e-mail about the same thing, but I wanted to see if anyone on here could help me out. Putting a TCI 3000 into my car soon, and this is my 2nd time around this block. Last time, didnt tune the car, and took under 3 trannys (under warranty thankfully), but I don't wanna do that again. What is OBDI Stall Wall?? What causes it?? Whats the fix?? any help is much appreciated!

Sep 20, 2010 | 10:02 PM

brucer

TECH Enthusiast

Joined: Dec 2009

Posts: 529

Likes: 0

the stall wall your referring to is the vss diagnostic enable minimum rpm setting, stock that value is set at 3000rpm, so you would probably need to have that changed in the tune..

Sep 22, 2010 | 01:22 PM

The LT1 That Could

Thread Starter

12 Second Club

iTrader: (3)

Joined: Dec 2002

Posts: 1,383

Likes: 1

From: Lubbock, TX

Thanks, I have always wondered what value it was that needed to be adjusted. I assume pcmforless can tune for this??

Sep 22, 2010 | 01:50 PM

brucer

TECH Enthusiast

Joined: Dec 2009

Posts: 529

Likes: 0

Quote:

Originally Posted by The LT1 That Could

Thanks, I have always wondered what value it was that needed to be adjusted. I assume pcmforless can tune for this??

i'm certain they can..

Sep 22, 2010 | 01:54 PM

old93camaro

TECH Resident

iTrader: (8)

Joined: Nov 2008

Posts: 778

Likes: 0

From: el paso, tx

they have did three tunes with me and me bugging the hell out of them and they all were on point with outstanding customer service, alvin is the one that does mine

Sep 22, 2010 | 04:30 PM

The LT1 That Could

Thread Starter

12 Second Club

iTrader: (3)

Joined: Dec 2002

Posts: 1,383

Likes: 1

From: Lubbock, TX

awesome, thanks guys!

Reply Subscribe