A few new mods
Thread Starter
TECH Fanatic
iTrader: (6)
Joined: Aug 2006
Posts: 1,213
Likes: 0
From: Charleston, S.C.
Thanks guys! It's a Harwood hood that I got from Jegs. I am also running canton vavle covers and Strange 10 way adjustable coilovers with 275/lb springs up front.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Fanatic
iTrader: (6)
Joined: Aug 2006
Posts: 1,213
Likes: 0
From: Charleston, S.C.
Surprisingly, I have not cut or rolled the fenders. Now I have removed the bump stops and given it the BFH for the 17x11 ZR1's that I have. The rear shocks are so stiff that it doesn't move much over bumps, but I do plan to roll the fenders before I put the street trim back on it.
Thread Starter
TECH Fanatic
iTrader: (6)
Joined: Aug 2006
Posts: 1,213
Likes: 0
From: Charleston, S.C.
Haven't had time with school and work. I don't think I will be back out until next season. By then the nitrous will be on the car along with the TQ arm and hopefully a rear end. My best times with the rear stock height is in my sig though.
where on the rear, did you have to use the BFH at? I can see, what Im going to have to do that, with the new wheels I picked up today. When you remove the bumpstops, do you have to remove the bracket and everything? Or just the pad?
On a few cars that I have done, I had to remove the mounting bracket and atleast 1/2 of metal upstream. Just to clear some of the larger tire/rims on the even a stock width rear. Some were even a 15x12 wheel and need more material removed.
Thanks Rob. I've got a 15x10 ,7.5 BS and will probably run a 275/60 tire. I bolted the rim up tonight and it looks like its going to be close with a tire on it. The rear end is a stock width, but its an S60.
