A fluff and buff gone wild.
Thread Starter
TECH Apprentice
Joined: Dec 2008
Posts: 372
Likes: 1
From: Kinston North Carolina
A fluff and buff gone wild. I went in to work today to work on my cyl heads for my carburated LT1 project for my El camino with all intentions of just a nice fluff and buff on them, but.... i got a little carried away. Had a set of used stainless 2.02/1.6 valves that i werent using, so i thought hey why not cut them down to work with the stock seats in my heads since i had nothing else planned for them. I wound up with 1.98 on the intakes and 1.55 on the exhaust. Needless to say i got a little carried away. Flow numbers turned out great though. I hadnt measured them yet but im guessing they are around 195 cc on the intake.
Int Exh
.100 90 .100 80
.200 147 .200 138
.300 202 .300 182
.400 244 .400 202
.500 277 .500 214
.600 289 .600 218
Exhaust was flowed with 1 3/4 pipe. On a 4 in bore.
I got Pictures but its not wanting to upload them now
Int Exh
.100 90 .100 80
.200 147 .200 138
.300 202 .300 182
.400 244 .400 202
.500 277 .500 214
.600 289 .600 218
Exhaust was flowed with 1 3/4 pipe. On a 4 in bore.
I got Pictures but its not wanting to upload them now
