Replacing Foglight
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2009
Location: FL
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Replacing Foglight
Does anyone know a part number from Autozone for foglight replacement? Assuming you have to replace the whole housing and not just a bulb on these, correct? Also, any tips for the easiest way to get to the lights or is the only way by taking the bottom panel off to get to it?
#2
you just replace the bulb. cant remember the part number though. and as for taking it out just a pair of needle nose and maybe a small tip flat screw driver is all i used. there are two plastic (cant thing of the word) pieces on each side that you pull the center out of and then the plastic they sit out and the whole assembly will come out. you have you loosen the adjuster too. hopefully that helps.
#3
Does anyone know a part number from Autozone for foglight replacement? Assuming you have to replace the whole housing and not just a bulb on these, correct? Also, any tips for the easiest way to get to the lights or is the only way by taking the bottom panel off to get to it?