need help
Thread Starter
Teching In
Joined: May 2010
Posts: 5
Likes: 0
From: GA
need help hey guys ive got a 350 vortec out of a 97 tahoe the motor runs amazing im looking at throwing a cam and 4.10s in it any suggestions on a cam ive got my eye on a few just wondring if any of you have this setup
Re-post this in the correct forum, the SBC-BBC forum. Do mention what car you're gonna put it in. Maybe then you'll get an answer. Probably a lot of answers......4.10's in an engine??
You want a cam that will work well with your particular heads/intake/headers set up. What do you currently have?
Also your transmission type (auto/manual) and stall speed (if auto) might play a factor in your rear end gear and tire size selection.
Also your transmission type (auto/manual) and stall speed (if auto) might play a factor in your rear end gear and tire size selection.
Thread Starter
Teching In
Joined: May 2010
Posts: 5
Likes: 0
From: GA
yea my bad on the wrong thread but its a otor ive had in my third gen its still got the stock iron heads im getting bigger valves tho the 4.10s arethe gear im using out back its got an edelbrock performer rpm for the intake its a 5 speed as well carbed
No prob, newbie LOL. Welcome to the LS1tech forums. Add a sig to your name so people know what car/engine you have. SEARCH is your greatest friend here.
Good luck with your ride!
Good luck with your ride!
