defaultexistence

iTrader: (11)

sigh.......even cheaper than lt1's http://cgi.ebay.com/ebaymotors/CAMAR...Q5fAccessories

nighthawk15

A bit of a PITA, but not as bad as some make it seem. This is assuming you get headers that fit.

MillerTime85

iTrader: (8)

They are nice but any with no emission hookups?

hitmanws6

iTrader: (20)

Those are crap, rested on the k member and burnt the #2 plug wire no matter what on my friends camaro

LSWHO

iTrader: (1)

It was cake with my LPPs. And I mean seriously cake.

5_LTR_ETR

mine are on the way. i'll be putting in a tubular k-member at the same time. what am I gonna have to watch out for? are these just gonna go straight up and in without the k member in the way?

firebird446

i ordered some stainless fro ebay and passenger side was hitting starter and driverside stearing shaft was hitting hard and there was no way to adju around it around it i sent them back.

5_LTR_ETR

i read a post about shifting the steering columb over via ovaling the mount holes and grinding the steering knuckle as well as the BFH mod on the primary.. i think he said he got an inch or more out of it all and got them to fit. never heard of these hitting the starter though

gregrob

iTrader: (8)

Really?

http://cgi.ebay.com/ebaymotors/NEW-L...item3cb4c33e46

MillerTime85

iTrader: (8)

^^^^ Look at his price though.They were half that when he first came out with headers

VinR1

iTrader: (17)

no f'kin way... I sent him a message the day before that listing was posted and he said he didnt have any left and wasnt planning on ordering any more...

SexyTransAm

iTrader: (6)

mine came from eworldsales1 but i payed like 330 with y pipe shipped to my door

gregrob

iTrader: (8)

Sounds shady to me.

lttransam

iTrader: (12)

i got the ones from eworldsales or how ever you spell it last year, and had NO fitment issues i was so impressed i love them! besides when i burnt a micro fiber on them but i re polished them and ready to go!

wysemunky

iTrader: (2)

oooh shiny! What would you guys rather do install these headers or do a spark plug and wire change with factory manifolds?

idformula

That's some bullshit, charging almost twice what he did before just because he saw that people wanted those headers, greedy ****** people. Ill get the lpp clones for 330ish and spend the other couple hundred and change on somthing else, I can deal with denting a primary or two fo 300 bones.

hitmanws6

iTrader: (20)

My friend and a sponsor/vendor on here 6LITEREATER sold those headers and he was told there would be no more made