Need Help. LS1 lid/Maf

Reply Subscribe

Thread Tools

Search this Thread

Feb 26, 2011 | 08:49 AM

Badazz 97 TA

Thread Starter

TECH Addict

iTrader: (18)

Joined: Aug 2007

Posts: 2,169

Likes: 2

From: Arizona

Need Help. LS1 lid/Maf

Doing the LS1 lid on my LT1 right now. Ran into a problem. I have the maf mounted on the lid but the harness to plug it in is too short being that it is in a different location now. About 3-4inches short

Is there a MAF extension harness on the market that i can buy(plug and play) without having to splice a new longer pigtail connector? Link? Really trying to avoid splicing. tried searching but couldnt find anything

any help would be great.

Feb 26, 2011 | 09:44 AM

Tbird232ci

TECH Regular

iTrader: (4)

Joined: Jun 2009

Posts: 408

Likes: 2

From: Cockeysville, Md

If you go on Summit, Caspers makes one, part number 109022. Pop the part number in the search bar and it'll come up. It's only 21.95, plus shipping. Might be able to plug the part number into ebay and find something cheaper too.

Feb 26, 2011 | 09:58 AM

97 texas ta

Teching In

Joined: Feb 2011

Posts: 49

Likes: 0

From: kirbyville tx

Where do u order the stuff to do that?

Feb 26, 2011 | 10:11 AM

BlackBird87

TECH Regular

iTrader: (6)

Joined: Dec 2009

Posts: 419

Likes: 0

From: Elmwood Park

Quote:

Originally Posted by Badazz 97 TA

I ran into the same problem. i tracked the wires back for the maf and they were taped to the rest of the wire for the iac and tps after i cut to tape i had enough slack to make it reach