LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Electric Fan Question

Thread Tools
 
Search this Thread
 
Old 03-25-2011 | 08:41 PM
  #1  
JAR-2's Avatar
Thread Starter
Teching In

 
Joined: Feb 2005
Posts: 6
Likes: 0
From: Clarksville,TN.
Default Electric Fan Question

Is the only way to get the fans to come on earlier to get a manual switch or is there just a relay that I can plug in???
Old 03-25-2011 | 08:43 PM
  #2  
gregrob's Avatar
TECH Senior Member

iTrader: (8)
 
Joined: Sep 2008
Posts: 5,130
Likes: 4
From: 6,000+ feet
Default

What? How could plugging in a relay make it come on faster?

To answer though, you reprogram the PCM to make the fans come on at the desired temp.
Old 03-25-2011 | 09:02 PM
  #3  
rich5368's Avatar
TECH Regular
iTrader: (2)
 
Joined: Apr 2010
Posts: 442
Likes: 0
From: Cheyenne, WY
Default

You can reprogram the stock computer. I did the switch. The parts cost about $4 bucks and it took all of 35 minutes to install. Piece of cake. The diagram on shbox was spot on.
Old 03-25-2011 | 09:04 PM
  #4  
nitrous2fast's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Dec 2010
Posts: 1,084
Likes: 0
From: Oklahoma
Default

Through the computer is the CORRECT way.
Old 03-25-2011 | 09:23 PM
  #5  
RamAir95TA's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: May 2005
Posts: 9,467
Likes: 7
From: South Jersey
Default

Originally Posted by nitrous2fast
Through the computer is the CORRECT way.
Don't forget most people add a manual switch along with the PCM programming so they can operate the fans with both.
Old 03-25-2011 | 09:51 PM
  #6  
nitrous2fast's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Dec 2010
Posts: 1,084
Likes: 0
From: Oklahoma
Default

well ya, but I was talking, more along the lines of, thermostat changes and such...
Old 03-26-2011 | 11:01 AM
  #7  
JAR-2's Avatar
Thread Starter
Teching In

 
Joined: Feb 2005
Posts: 6
Likes: 0
From: Clarksville,TN.
Default

I am planning on putting the 160* stat in but thats still not going to be good enough for sitting in traffic. Thanks for the help everyone.




All times are GMT -5. The time now is 06:55 AM.