Picked up the engine today from the machine shop
Picked up the engine today from the machine shop This is the engine going in the Z28......
Full rebuild stock cube
LE1 heads
1.6RR
918 springs
Trick flow PR
2.00 Ferrea (intake), 1.56 Manley (exhaust) Recommended for spray.
Crane 227 cam
No smog
No Air
No EGR
Intake and TB out getting powder coated perma chrome.
Purchased brand-X with a 150 shot
Ebay Stainless LT with Y-pipe.
3500 Stall
Goal is 425-450hp at the wheels through a stalled auto and stock 3.23 gears.
Full rebuild stock cube
LE1 heads
1.6RR
918 springs
Trick flow PR
2.00 Ferrea (intake), 1.56 Manley (exhaust) Recommended for spray.
Crane 227 cam
No smog
No Air
No EGR
Intake and TB out getting powder coated perma chrome.
Purchased brand-X with a 150 shot
Ebay Stainless LT with Y-pipe.
3500 Stall
Goal is 425-450hp at the wheels through a stalled auto and stock 3.23 gears.
Last edited by fuzzyjk; Jun 11, 2011 at 04:38 PM. Reason: Added photos
On spray those numbers are doable, that's actually not a bad cam. FrankB on CZ28.com was running 11s with that cam on the stock heads years ago and trapping 116MPH in an auto, fairly light car, 3350#. I also knew some one local who had that cam in a 355, stock heads on spray, car ran really well and drove nice
