More wiring problems
More wiring problems So I was just about to install my ltcc box when I found I have a problem; for some reason the black ground by the stock Icm is showing 12v. I noticed when I unplug the c105 harness plug on the passenger side fender the ground wire no longer shows 12v. Here is the problem I noticed the c105 plug on my engine harness is different from the body harness it connects to; I have a 96 a4 harness in a 97 m6 car. I need to know what the wires from the body lamp harness are, I found the wires for the engine harness. But the body harness connector looks different; a couple of my wires on my engine harness don't even connect to a wire on the body harness. Here is the engine and trans harness plug http://shbox.com/1/harness_connector_faces.htm can any one tell me what the body harness should look like for 96-97 a4 and m6 cars?
Last edited by henry172; Jul 7, 2011 at 05:04 PM.
Never mind I think I figured it out; the ground wire was showing 12v until I hooked up the ground wire then it is a ground. As for the c105 plug the extra wires on the plug are for traction control every other wire seems to be connected to the correct wire. I should have the car up and running in a couple hours.
