lt1 tips and parts ?
#1
On The Tree
Thread Starter
Join Date: Sep 2011
Location: delaware
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
lt1 tips and parts ?
im looking for more tips on the lt1 and parts its a 93 z28 i need a 93 chip so i can unlimmit it fom 110mph and a speedo to set it up it has 2.73 rear end and some godly tranny 700r4
#4
On The Tree
Thread Starter
Join Date: Sep 2011
Location: delaware
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
tips
just any thing to make the car fast for cheap and nicer its got a full 3" cat back and aftermarkit cat a kinda made up air intake a cone filter on the stock intake and a elbow froma cop car with the hole for the slinser seld off and 93 is a chip car you cant tune them i just want something to take off that top speed limmiter the car has 190,000 miles on dose not smoke or show sins of a tired motor the hol car is in realy good shape my 92 camato rs is beat and feels wore out this thing feels close to new no oil leaks on the lt1 and i think it has some trany work
#6
11 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: ky
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
just any thing to make the car fast for cheap and nicer its got a full 3" cat back and aftermarkit cat a kinda made up air intake a cone filter on the stock intake and a elbow froma cop car with the hole for the slinser seld off and 93 is a chip car you cant tune them i just want something to take off that top speed limmiter the car has 190,000 miles on dose not smoke or show sins of a tired motor the hol car is in realy good shape my 92 camato rs is beat and feels wore out this thing feels close to new no oil leaks on the lt1 and i think it has some trany work
lol j/k bro, if it has no oil leaks, congrats. as for the chip, dont do it. go for a tune, take advantage of the CAI, can the catback. my 2cents
#7
TECH Fanatic
He is saying he has a '93, the only way to tune it is have a new chip burned. Which is true, I used Alvin at pcmforless also.
Trending Topics
#9
TECH Fanatic
iTrader: (11)
Holy Christ ! Go check out noobie fact sticky then do some search button fondaling ...
www.Lt1pcmtuning.com
Do some reading and learning before you start spending and making mistakes ..How old are you?
www.Lt1pcmtuning.com
Do some reading and learning before you start spending and making mistakes ..How old are you?
#10
TECH Fanatic
iTrader: (8)
Join Date: Jan 2011
Location: Pinellas Park Florida
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
I would not mod or try and make a 190k motor push more power before freashining it up before doing so. You will just end up replacing the engine anyway.
All of you trolls who want to talk **** about grammer or run on's. Go on an import site with the rest of the dick heads and leave the advice giving to those who WILL help.
All of you trolls who want to talk **** about grammer or run on's. Go on an import site with the rest of the dick heads and leave the advice giving to those who WILL help.
#11
11 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: ky
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
I would not mod or try and make a 190k motor push more power before freashining it up before doing so. You will just end up replacing the engine anyway.
All of you trolls who want to talk **** about grammer or run on's. Go on an import site with the rest of the dick heads and leave the advice giving to those who WILL help.
All of you trolls who want to talk **** about grammer or run on's. Go on an import site with the rest of the dick heads and leave the advice giving to those who WILL help.
and i thought you could do a SD tune on those cars?
#12
On The Tree
Thread Starter
Join Date: Sep 2011
Location: delaware
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
sorry
its a power ture car so nothing crazy my dad has the pro street elky for the stuped stuff. sorry about the run on and two i have driven it i feel there is no way the motor has 190 some on it its way to smooth no smoke even when you stand on it and the plugs are way clean im thinking it had some speedo issus and was swopted i not sure but its a strong motor but even with that i dont want to put a blower on it mid 12s would be good for the car thats it i have my toys to hits a 84 supra that runs 10s i dont want nothing crazy out of this car.three i did a search man is there alot of stuff on here worst then thurdgen.org thanks for the input so far. o and im 20 btw and my name is anthony
#13
93's are factory equipped with a Speed Density tune, with the lack of a MAF and all.
OP, I have had very good service with MADZ28 for tuning my 93. The company has since changed its name to MadTuner, but the service is still the same. They get my vote for Chipped cars.
OP, I have had very good service with MADZ28 for tuning my 93. The company has since changed its name to MadTuner, but the service is still the same. They get my vote for Chipped cars.
#15
TECH Regular
iTrader: (2)
Join Date: Nov 2006
Location: Escondido, CA
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
+847851651
Spend some time reading stickies. I suggest reading general performance type stuff (there is something named "So you want to go fast"). These forums assume a certain level of basic understanding before you start randomly posting. There is a lot to be learned from these cars, but you have to put in the effort. These forums can be a big help, but please do not use them to be basically lazy. I spent a lot of time with a Haynes manual trying to learn some of the basics of stock then read a lot of the stickies. Then I went along with buddies when they were doing some mods on thier cars (I would stay away from forced induction cars at first, they will just confuse you till you get your mind around naturally aspirated IMHO). Then you start asking questions on here.
Again, this forum assumes a basic level of education before you come on here.
Spend some time reading stickies. I suggest reading general performance type stuff (there is something named "So you want to go fast"). These forums assume a certain level of basic understanding before you start randomly posting. There is a lot to be learned from these cars, but you have to put in the effort. These forums can be a big help, but please do not use them to be basically lazy. I spent a lot of time with a Haynes manual trying to learn some of the basics of stock then read a lot of the stickies. Then I went along with buddies when they were doing some mods on thier cars (I would stay away from forced induction cars at first, they will just confuse you till you get your mind around naturally aspirated IMHO). Then you start asking questions on here.
Again, this forum assumes a basic level of education before you come on here.
#16
On The Tree
Thread Starter
Join Date: Sep 2011
Location: delaware
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
word's
maybe i cam off rong i want to know what parts not to use and use like vic's intake is it woththe 500 bucks or the mds oti spark im not stuped when it coem to sbc or cars
#18
Staging Lane
iTrader: (1)
Join Date: Aug 2011
Location: Midwest City, OK
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
just start with basic bolt ons, headers, cat-back, intake, stall. and a TUNE. i also have a 93 and just because it has the chips you have to burn dose not mean it cant be tuned, there are still a few good guys out there that do 93's.
#20
TECH Fanatic
iTrader: (11)
Holy Christ ! Go check out noobie fact sticky then do some search button fondaling ...
www.Lt1pcmtuning.com
Do some reading and learning before you start spending and making mistakes ..
www.Lt1pcmtuning.com
Do some reading and learning before you start spending and making mistakes ..