LT1-LT4 Modifications 1993-97 Gen II Small Block V8

bucking help

Thread Tools
 
Search this Thread
 
Old Sep 9, 2011 | 07:15 PM
  #1  
redtransam95's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Feb 2010
Posts: 245
Likes: 0
Default bucking help

my lt1 will idle good untill you put it under load cold or hot then it will start bucking. problem usully isnt notaciable untill a block from my house.doesnt clear up with more throddle have to just coast it home to keep it from doing it but not noticeable at idle.

IDEAS???
new wires new cap and rotor new plugs
Reply
Old Sep 9, 2011 | 09:23 PM
  #2  
nitrous2fast's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Dec 2010
Posts: 1,084
Likes: 0
From: Oklahoma
Default

First check your plugs and wires. Make sure that the wires aren't arcing to the exhaust or burnt to them. lol.

then go from there.....

next i would check the o2's.
Reply
Old Sep 12, 2011 | 03:31 PM
  #3  
redtransam95's Avatar
Thread Starter
Launching!
iTrader: (7)
 
Joined: Feb 2010
Posts: 245
Likes: 0
Default

would o2s cause this problems
Reply
Old Sep 12, 2011 | 04:33 PM
  #4  
SoxXpupPeT's Avatar
TECH Junkie
iTrader: (34)
 
Joined: May 2008
Posts: 3,431
Likes: 1
From: Yonkers, NY
Default

I doubt O2's will cause that. Certainly check your plugs and wires first. Even if your wires dont look bad, doesnt mean that there good. Put a multimeter on them and check them for the ohm reading.
Reply




All times are GMT -5. The time now is 07:50 PM.