Does anybody know where to get...
Thread Starter
Teching In
Joined: Feb 2012
Posts: 42
Likes: 0
From: Treasure Coast, Florida
Does anybody know where to get... ... A set of stock injectors for my 96 TA? I have a couple of them leaking and since this is my DD I would like to go with stock. I do not currently have any real plans to build this car over the 375-ish mark so there is no real need to go bigger.
I would post in the parts wanted section but it is requiring 50 posts and I would like some a lot sooner then that.
If you have a good set that will work please let me know, thanks and sorry if this is in the wrong section.
Albert
I would post in the parts wanted section but it is requiring 50 posts and I would like some a lot sooner then that.
If you have a good set that will work please let me know, thanks and sorry if this is in the wrong section.
Albert
Thread Starter
Teching In
Joined: Feb 2012
Posts: 42
Likes: 0
From: Treasure Coast, Florida
I am not sure about the sellers on there, I am a car guy and I feel better getting them from a car guy. Plus if someone is taking them off anyway to upgrade then they can make a few bucks.
Thanks again
Albert
Thanks again
Albert
! PM sent 
If you dont find any.I have a stock set that I ran some injector cleaner thru. cleaned and ready to go. Just not flow matched. I prob. have a bag of new oring seals for em also.
Shoot me a email offer. Not looking to get rich off them as They are doing me no good sitting on a shelf.
Shoot me a email offer. Not looking to get rich off them as They are doing me no good sitting on a shelf.
