colt_impala

iTrader: (3)

Can someone shoot me the link to the 100 dollar valve springs that everyone seems to like? I'm running a cc503 cam, planning to use the factory retainers.

Zlow28

iTrader: (11)

For $100, these might be the ones you're lookin for.

colt_impala

iTrader: (3)

Bingo. Thanks. Those are the ones I was looking for.

bufmatmuslepants

iTrader: (3)

I've never heard of these are alot of people running them without issue? Are they comparable to pac1218s?

Rodinator1234

I have these in my car with zero problems. I think for a cam swap with valve springs they a good deal.

lethal bird

iTrader: (12)

Never heard of these ether.

za355tx

iTrader: (108)

Comp 987's are what most people run with that cam. They are good to .550 lift and probably a little more and still work with the stock locks and retainers. Here's the summit link.

http://www.summitracing.com/parts/CCA-987-16/

Speedy

I'm using Alex springs with a CC503 and 1.6 Magnum roller rockers. This engine is two years old, been up and down the RPM range hundreds of times and they work well. As with all valve setups, the key is to follow the rules and set it up properly.

Alex springs are a fantastic deal.

F0x Slaughter

Lloyd Elliot says he tries to run Patriot Gold springs when ever he can, the offerings on his site uses them. 270 bucks for everything needed.