Need help finding a cutout flange???
Need help finding a cutout flange??? Hey gents, I'm looking to add in a flange for my electric cutout and wanted something a little different.
http://www.summitracing.com/parts/RRP-Y300REV1/
This setup is what I want however, I need the cut out to be on the straight outlet instead of the Y part. Would this have to be made or can something like I want be purchased?
I'm looking to keep my exhaust straight to the cutout by the axle "dump" and when the cutout is close it will direct the flow back up and over the axle to a stock style muffler below the gas tank.
My idea here is to keep the 3" flow straight to the cutout for max flow at the track and closed will allow for quiet riding around town.. Let me know what you guys think and give me some input and opinions please.
Thanks
http://www.summitracing.com/parts/RRP-Y300REV1/
This setup is what I want however, I need the cut out to be on the straight outlet instead of the Y part. Would this have to be made or can something like I want be purchased?
I'm looking to keep my exhaust straight to the cutout by the axle "dump" and when the cutout is close it will direct the flow back up and over the axle to a stock style muffler below the gas tank.
My idea here is to keep the 3" flow straight to the cutout for max flow at the track and closed will allow for quiet riding around town.. Let me know what you guys think and give me some input and opinions please.
Thanks
search '3-bolt header flange' on ebay. $5.95 plus $5 shipping... any decent exhaust shop should be able to cut and weld up a short pipe just before the axle and tack on the flange
