tunercat comm port
#1
tunercat comm port
When trying to connect my aldl cable to my usb the entire comm port list says invalid port. I have installed the usb drivers and aldl drivers. Tunercat is a pain in the ***. Ive used lt1 edit, hp tuners, and tunerpro rt with ease and no problems.
btw 94 trans am also have the $EE loaded
btw 94 trans am also have the $EE loaded
#2
Plug the cable into your laptop, do not hook up to the car.
Go to Start > Control Panel > Device Manager under USB see if anything has a Yellow exclamation point.
If it does, right click on it, hit update drivers, then hit browse, guide it to your CD drive D:\ then let it scan the CD.
Then go in TunerCats and hit Options > Com Port Selection > Scroll through and find the port.
Go to Start > Control Panel > Device Manager under USB see if anything has a Yellow exclamation point.
If it does, right click on it, hit update drivers, then hit browse, guide it to your CD drive D:\ then let it scan the CD.
Then go in TunerCats and hit Options > Com Port Selection > Scroll through and find the port.
#5
Ive tried four different comm ports and still showing invalid on the list. I have downloaded the usb serial drivers still no luck. Still showing code 10 in the device manager no matter what I do.