drivetrain swap
05-30-2013, 12:03 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Location: Indiana
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
drivetrain swap OK guys. Starting the teardown. Wondering on if I will run into any issues.
Swapping engine and trans from a 95 Z 6 speed to a 95 Firehawk also a 6 speed.
Hoping to take the engine harness, computer, engine, and trans out of the Z and put right into the Hawk.
Any reason this will not be a plug and play? The Z had traction control, and the Hawk does not. Didn't have to unplug anything from the traction control box(?), so didn't think this would be an issue.
Thanks for all your help.
Swapping engine and trans from a 95 Z 6 speed to a 95 Firehawk also a 6 speed.
Hoping to take the engine harness, computer, engine, and trans out of the Z and put right into the Hawk.
Any reason this will not be a plug and play? The Z had traction control, and the Hawk does not. Didn't have to unplug anything from the traction control box(?), so didn't think this would be an issue.
Thanks for all your help.
