What is this??
09-13-2013, 12:34 AM
#4
yea I only realized that after I accident cut one of the wires. I feel like an *******. I soldered it back together and sealed it up so it should be good. But I'm pretty sure I got way into this whole weight reduction thing. I'm hoping that someone like BP Automotive can help me out. I'm looking for someone that can make me a new interior harness but without all the bullshit that I don't need.
09-13-2013, 04:39 PM
#5
Staging Lane
Join Date: Jun 2013
Location: Oklahoma
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Theres some good kind ppl over at BP.
On my 94 the rear wheel speed sensor was there with the fuel pump wires. They are the two twisted together.
If the time is taken you can trace and de-pin any wires you don't need at the bulkhead and or fuse box to use existing wires and save $$. I managed to fill a large black trash bag with wires and such.
The only problem I had when doing so was I lost my 3rd brake light while pulling the rear defrost...owell.
On my 94 the rear wheel speed sensor was there with the fuel pump wires. They are the two twisted together.
If the time is taken you can trace and de-pin any wires you don't need at the bulkhead and or fuse box to use existing wires and save $$. I managed to fill a large black trash bag with wires and such.
The only problem I had when doing so was I lost my 3rd brake light while pulling the rear defrost...owell.