Going Carbed
Thread Starter
Teching In
Joined: Oct 2008
Posts: 10
Likes: 0
From: South Riding, VA
Going Carbed I have most of the stuff already to do it but I need opinions/guidance on the intake. I have done a lot of research on multiple boards I know what it will take to convert to a carb. The intake is the big question.
1. Which intake: Super Victor or Victor Jr.? Leaning toward Super Vic
2. Mod the intake or drill the heads for the bolt pattern? I am leaning toward drilling the heads as that is something I could probably do myself but I have not read or heard much of folks taking this route.
Please don't turn this into an EFI vs. Carb thread or a LSX vs. LTX. I have read my share of them and made my decision.
This will be a stock bottom end build (only 64k miles) with either a LE2 or AI200 top end.
Thanks!
1. Which intake: Super Victor or Victor Jr.? Leaning toward Super Vic
2. Mod the intake or drill the heads for the bolt pattern? I am leaning toward drilling the heads as that is something I could probably do myself but I have not read or heard much of folks taking this route.
Please don't turn this into an EFI vs. Carb thread or a LSX vs. LTX. I have read my share of them and made my decision.
This will be a stock bottom end build (only 64k miles) with either a LE2 or AI200 top end.
Thanks!
