LT1-LT4 Modifications 1993-97 Gen II Small Block V8

95 z28 spit and sputter problem

Thread Tools
 
Search this Thread
 
Old 10-15-2014, 04:22 PM
  #1  
Registered User
Thread Starter
 
king karny's Avatar
 
Join Date: Oct 2014
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default 95 z28 spit and sputter problem

So here's the story 95 z28 m6 I drive it everyday at first its a hard start. Once I get it going she's going no problem but if I drive it for a half hour and shut it down she gives me problems. On restart she will be hard to start again and once in gear it sounds like she is struggling for fuel with intermittent spark but if I push her through it she will calm down once I get up to speed about 40-50 mph the other thing I noticed when this happens is if she is over the 220 line on the therm its guaranteed to happen but if she hasn't broke 180 it won't happen at all I've replace optu wires water pump therm and sensor and serp belt she's got 137000 miles
Old 10-17-2014, 11:04 AM
  #2  
TECH Apprentice
iTrader: (3)
 
davidc212k's Avatar
 
Join Date: May 2006
Location: Dallas, TX
Posts: 329
Likes: 0
Received 1 Like on 1 Post

Default

check the ICM and the heatsink on it and scan it for codes.



Quick Reply: 95 z28 spit and sputter problem



All times are GMT -5. The time now is 10:08 AM.