LT1-LT4 Modifications 1993-97 Gen II Small Block V8

lt1 burning oil!

Thread Tools
 
Search this Thread
 
Old 11-03-2014, 11:57 PM
  #1  
Teching In
Thread Starter
 
1993 trans/a's Avatar
 
Join Date: Aug 2012
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default lt1 burning oil!

okay I need some help. recently got done with my lt1. redid heads, new cam, lifters etc. have major oil consumtion! 1qt every 300 miles. you can see blue some at idle and gets worse when reved up. all 8 plugs are oil coated! cylinders have great compression! have lots of blow by! checked all valve seals and redid intake gasket. I don't know what else to do!
Old 11-04-2014, 12:39 AM
  #2  
Staging Lane
iTrader: (4)
 
MedicinalCreamDogs's Avatar
 
Join Date: Nov 2013
Location: Texas
Posts: 99
Likes: 0
Received 0 Likes on 0 Posts
Default

piston rings?
Old 11-04-2014, 12:42 AM
  #3  
Village Troll
iTrader: (2)
 
SS RRR's Avatar
 
Join Date: Oct 2002
Location: Jackstandican
Posts: 11,006
Received 517 Likes on 373 Posts

Default

If compression is good then you could have an oil ring problem.
Old 11-04-2014, 05:50 AM
  #4  
TECH Addict
iTrader: (7)
 
Blackbirdws6's Avatar
 
Join Date: Mar 2005
Location: Piscataway, NJ
Posts: 2,161
Received 3 Likes on 3 Posts

Default

Did you RTV the rocker studs? Sounds like rings but if the bottom end wasn't touched and was fine before, go back through the heads. Double check valve seals, intake to head gasket, etc.
Old 11-04-2014, 08:36 AM
  #5  
TECH Fanatic
 
93M6Formula's Avatar
 
Join Date: Aug 2008
Location: Nebraska
Posts: 1,740
Likes: 0
Received 2 Likes on 2 Posts

Default

Yeah if it wasn't doing it before, you have something wrong in the heads. Valve guides, stem seals etc.
Old 11-04-2014, 10:52 AM
  #6  
11 Second Club
iTrader: (1)
 
96capricemgr's Avatar
 
Join Date: Sep 2004
Posts: 11,975
Likes: 0
Received 12 Likes on 12 Posts

Default

Stop running it before you do real damage.
Are the intake rocker studs sealed?
With all 8 nasty I double it is the intake gasket but could be a bad mismatch from the heads to intake.

Guys have gotten popular ported heads so thin in a spot or two they sucked oil but all 8 would be weird.

How about the PVC shield on the bottom of the intake, was it left off?



Quick Reply: lt1 burning oil!



All times are GMT -5. The time now is 02:41 PM.