mechanic is stumped, any ideas?
I went over the routing so many times I thought I was nuts lol. Had my buddy checked and the shop just put on a new opti so they were done again. They're was a crack in the opti so they replaced it, I guess it's possible the opti was the prob before and now the wires are wrong? I'll look it over
I went over the routing so many times I thought I was nuts lol. Had my buddy checked and the shop just put on a new opti so they were done again. They're was a crack in the opti so they replaced it, I guess it's possible the opti was the prob before and now the wires are wrong? I'll look it over
well its off to a new mechanic! those guys couldn't figure it out and wanted to tear it down. my buddy suggested this other shop so I called him up and we had a 20min convo about it, sounds like he knows allot about modified engines unlike most grease monkeys and has allot of experience with LT1s. urgh what a waste of money.. wish I had time to drop the k member so I could bare to work on it but when I've got the time I dont have the money and when I have the money I dont have the time. dang kids, this my real baby! lol j/k
I've also been debating about getting the valve guides fixed in my LE2's and get them put on.. I just don't like paying what that will cost to do, mechanics around here are all 100+ an hr and swapping heads aint that hard but I'll get raped on the bill. do you think it could be an issue with the heads? they're just stockers with upgraded valves and springs, never really had them checked out just sent them out to have them cleaned up like new before I put them on and the shop I had send them out supposively checked all the springs.. I should probably get them fixed just incase it comes down to tearing the engine back down cause if that has to happen I'd be kicking myself if these weren't ready to throw on.
Last edited by z_speedfreak; Jun 27, 2015 at 03:33 PM.
TECH Regular
Joined: Jan 2015
Posts: 493
Likes: 2
nah I've been busy fishing out of state, haven't been home in a couple months. does ion ever mess up? I've never heard of that happening before. I'm just gonna get it retuned cause I'm gonna have the new mechanic throw the 30#svo's on which I had sent off, they'll be back before this new mechanic is ready.
I've also been debating about getting the valve guides fixed in my LE2's and get them put on.. I just don't like paying what that will cost to do, mechanics around here are all 100+ an hr and swapping heads aint that hard but I'll get raped on the bill. do you think it could be an issue with the heads? they're just stockers with upgraded valves and springs, never really had them checked out just sent them out to have them cleaned up like new before I put them on and the shop I had send them out supposively checked all the springs.. I should probably get them fixed just incase it comes down to tearing the engine back down cause if that has to happen I'd be kicking myself if these weren't ready to throw on.
I've also been debating about getting the valve guides fixed in my LE2's and get them put on.. I just don't like paying what that will cost to do, mechanics around here are all 100+ an hr and swapping heads aint that hard but I'll get raped on the bill. do you think it could be an issue with the heads? they're just stockers with upgraded valves and springs, never really had them checked out just sent them out to have them cleaned up like new before I put them on and the shop I had send them out supposively checked all the springs.. I should probably get them fixed just incase it comes down to tearing the engine back down cause if that has to happen I'd be kicking myself if these weren't ready to throw on.
:EDIT; if you'd ever wanna get rid of those LE2's shoot me a PM.. I've been looking for months.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Last edited by z_speedfreak; Jun 28, 2015 at 10:29 PM.
damn, i'm really gonna be kicking myself if its only the tune. I guess my next step should be those injectors and a re-tune.. maybe I can borrow a cable and data log it to have him double check it.. or maybe I should jump ship to solomon
Teching In
Joined: Nov 2015
Posts: 2
Likes: 0
ok, so what happened? I just read through this whole thread, and I want to know the ending.
long story short the first mechanic fuct it all up running it wayy to long trying to trouble shoot in a state it shouldn't of been running it too long. the 2nd mechanic I brought it to saw the bottom end was in bad shape on 1st inspection so stopped there and never got the issue diagnosed. what ya gonna do.. I should have a 383 going in by july, gettin the valve guides fixed on my LE2's in the mean time so it'll be a whole new animal
Last edited by z_speedfreak; May 8, 2016 at 08:24 AM.
Teching In
Joined: Nov 2015
Posts: 2
Likes: 0
I am putting together a stocker LT1(96) for my son's 70 camaro, bolted the heads on and rockers and pushrods,on friday, today I hope to get the intake and valve covers, and water pump on, soon(few days?) I should be starting the engine on a low stand I made for running engines. Once I have made sure there are no leaks, no overheating, etc. I will put it in the car. I am using an optispark off of a good running 94 LT1 engine I got, that turned out to have a broken main cap. I never get lucky and have everything work out!
^^^ what he says, Has it been sitting that long with those injectors? if so, probably varnished up...
