Valve covers
Thread Starter
TECH Resident
Joined: Apr 2010
Posts: 926
Likes: 18
From: Central Texas
Valve covers Is there any way to relocate the alternator to get more clearance for after-market valve covers? I was given a Christmas present pair of Billet Specialties Covers and would like to use them. Thanks
Depending on the height of the covers, you may be able to notch the back of the alternator to make them fit. I have some polished aluminum covers that I used, and was able to make them fit that way.
TECH Veteran
Joined: Apr 2008
Posts: 4,985
Likes: 112
People have ground down the alt case and also taken the rear case of alt and rotated it so the recessed part of the case clears the aftermarket VC
You just remove the 3 bolts holding the two case halves together and rotate the rear one and re-assemble. You do need to use a paper clip to hold in the brushes when splitting the two halves apart and re-assembly
You just remove the 3 bolts holding the two case halves together and rotate the rear one and re-assemble. You do need to use a paper clip to hold in the brushes when splitting the two halves apart and re-assembly
I think most of the kits for alt relocation delete the ac. I have some pretty tall covers and even with turning and grinding the alternator it will never fit mine. Give it a shot and if not, try to sell them and buy some lt1 specific covers or you can cut and weld a notch in the covers. That's my plan.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
TECH Resident
Joined: Apr 2010
Posts: 926
Likes: 18
From: Central Texas
This is a Buick Roadmaster engine. The bracket and much smaller alternator on the 94 truck I'm putting it in might work Anybody know who I can get to rework the harness and re program the PCM to get it running so I can get it to the dyno?
