Parts needed to finish this build.. HELP
#1
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Minnesota
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Parts needed to finish this build.. HELP
so i got a 1990 rx7 FC and i got an lt1 out of a 1995 trans am and a 4L60E trans.. im going to be putting those two into the rx7 but i need to know what else im gonna need and how much it will cost me. I will be doing the work myslef .
#3
TECH Fanatic
#4
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Minnesota
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Stand alone harness
PCM tune to delete VATS also
Custom exhaust, mounts, cooling system.
I see an easy 2500.00 to do it right, will be sweet when done.
https://youtu.be/l7hQgB58xZ4
https://youtu.be/bk8Abh8I6YA
https://youtu.be/myzRCyfv9gc
PCM tune to delete VATS also
Custom exhaust, mounts, cooling system.
I see an easy 2500.00 to do it right, will be sweet when done.
https://youtu.be/l7hQgB58xZ4
https://youtu.be/bk8Abh8I6YA
https://youtu.be/myzRCyfv9gc
#5
Staging Lane
Thread Starter
Join Date: Dec 2016
Location: Minnesota
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
what parts do i need off here exactly? that would be helpful to know what id need .
#6
TECH Junkie
iTrader: (31)
You will need, from what I see is:
Mounts
Trans crewmember
C4 Corvette Driveshaft and modifacation
Large capacity radiator
http://www.norotors.com/index.php?topic=408.0
Mounts
Trans crewmember
C4 Corvette Driveshaft and modifacation
Large capacity radiator
http://www.norotors.com/index.php?topic=408.0
#7
TECH Fanatic