LT1 Tuning
Thread Starter
Teching In
Joined: Aug 2011
Posts: 9
Likes: 0
From: Southwest MN
LT1 Tuning Well I've used LT1 Edit then moved into DST, Now that I bricked my chips might even fried the pcm. I think DST is Vin locked. But been doing some research.
96-97 LT1's can go back to OBD1 plug n play. Or repin and go 411 and go hp tuners or efi live. Was thinking if DST was vin locked have to check to make sure
but would be quickest for me to get up and running. 5.7 express van calibration with my VIN. Would get me up and running to I get new software. Its already been
proved 411 will run LT1 in batch fire mode cause 96-97 have 4x crank but with use of opti distributor might get sequential. Just putting my thoughts out there in hopes
it might help someone ease into the new realm of the LSx Technology.
96-97 LT1's can go back to OBD1 plug n play. Or repin and go 411 and go hp tuners or efi live. Was thinking if DST was vin locked have to check to make sure
but would be quickest for me to get up and running. 5.7 express van calibration with my VIN. Would get me up and running to I get new software. Its already been
proved 411 will run LT1 in batch fire mode cause 96-97 have 4x crank but with use of opti distributor might get sequential. Just putting my thoughts out there in hopes
it might help someone ease into the new realm of the LSx Technology.
