LT1-LT4 Modifications 1993-97 Gen II Small Block V8

ScannerDanner troubleshoots an LT1 ignition issue...

Thread Tools
 
Search this Thread
 
Old May 14, 2019 | 07:10 PM
  #1  
ACE1252's Avatar
Thread Starter
TECH Resident
10 Year Member
 
Joined: Jun 2013
Posts: 853
Likes: 32
From: Kernersville, NC
Default ScannerDanner troubleshoots an LT1 ignition issue...

For your viewing pleasure.....

Reply
Old May 15, 2019 | 05:16 AM
  #2  
transbird95's Avatar
TECH Enthusiast
15 Year Member
Liked
iTrader: (4)
 
Joined: May 2010
Posts: 736
Likes: 12
From: little falls minnesota
Default

I just watched this and was gona post it up! Been watching him for a long time.
Reply
Old May 15, 2019 | 06:34 PM
  #3  
JDishong's Avatar
On The Tree
15 Year Member
iTrader: (3)
 
Joined: Nov 2008
Posts: 126
Likes: 2
From: Bay Area CA
Default

Thanks for the vid.
Is this applicable to the 93?
Reply
Old May 15, 2019 | 08:46 PM
  #4  
ACE1252's Avatar
Thread Starter
TECH Resident
10 Year Member
 
Joined: Jun 2013
Posts: 853
Likes: 32
From: Kernersville, NC
Default

It should be close, if not the same. Wire colors might be different.

Danner's video is an example of how a tech worth his/her salt should approach this problem.

As Injuneer pointed out on CZ28, it might be best for those without scopes and amp clamps to start with Shoebox's guides. Then break out the scopes and such to dig deeper if necessary.

http://shbox.com/1/4th_gen_tech2.html#opti_test

Another one I always recommend is the Buick Know How vid on the Opti Spark system.

Reply




All times are GMT -5. The time now is 11:39 PM.