strictly track car
strictly track car its a 94 z28 with weight taken out of the bumpers and taken all the a/c stuff completly out when im done typing this. i just got another set of stock fully ported heads that were flowed at 278 on the intake, forgot the exaust.this car is gonna be strictly track, so what cams do you guys have in mind that will make big power so i dont have to change cams again??? i want this very radical and this is going in an a4 but soon to be th350.
any other suggestions on tips and tricks and weight reduction is helpful. thanks
any other suggestions on tips and tricks and weight reduction is helpful. thanks
TECH Enthusiast
Joined: May 2004
Posts: 549
Likes: 0
From: St. Peters, MO
There was a sticky in the drag racing section about all weight reduction mods...check that out and do all of them and u can get down 3000 ish if u get radical. You can take ur heater core out too...get rid of the ABS and other things. For the interior I would run one aluminum drag seat with no carpet...interior panels and I would customize the dash by getting a sheet of aluminum and using a circle cutting drill bit to put some autometer gauges in there. If you're crazy enough...get some speed glass LEXAN style to drop even more weight. U can ditch the console too and get a b/m megashifter with a plastic console. Lightweight carpet can replace the carpet u have if u want carpet. Insulation can go...move the battery to the back. Aluminum radiator and well the list goes on and on. 
