suggestions on next mods
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Feb 2004
Posts: 333
Likes: 0
From: Pittsburgh, PA
suggestions on next mods ive been doing alot of debating on what to do next. everything i got is in my sig, plus ive got 3.73's, march pulleys, and shift kit that still need to go on over the winter. i should have about 3k to play with come spring. im pretty sure i am gonna do some heads and cam. i wanted to try and get all the ends and odds before i do. what else is there other than suspension.
Originally Posted by METALBEAST
A good stall converter is a must. I would recommend a Vigilante stall converter with a 3000 RPM stall.
computer tuning is a must, even on a stock car.. I cut .3 tuning my vehicle when it was stock w/ homemade cold air, exhaust cutout after cat, removing spare tire, and front sway bar
ran 13.02 104.55 1.89 60' 245 stock BFGs before the tuning ran 13.32 @ 102.9 Houston Raceway Park november 2002 -2,000' DA
ran 13.02 104.55 1.89 60' 245 stock BFGs before the tuning ran 13.32 @ 102.9 Houston Raceway Park november 2002 -2,000' DA
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Feb 2004
Posts: 333
Likes: 0
From: Pittsburgh, PA
i use my friend's nittos for now. i was going to wait to get the tc, so i could match it with my final setup. i heard deciding what stall depends on just about everything in your setup.
Yea, you want to match the stall speed on a few factors, but with a cam its a must if you want the best performance out of the cam. For 3K you could easily get a nice h/c package and stall.
