Would an LS1 intake ducting fit...
Do a search here or on CZ28.com, a few guys have done it. I believe the concensus was that on a stock hood, you had to do a LOT of clearancing towards the front of the hood. On an Ultra-Z or WS6 hood it was much easier. Good luck.
-J
-J
Teching In
Joined: Sep 2004
Posts: 23
Likes: 0
Originally Posted by lastcall190
Do a search here or on CZ28.com, a few guys have done it. I believe the concensus was that on a stock hood, you had to do a LOT of clearancing towards the front of the hood. On an Ultra-Z or WS6 hood it was much easier. Good luck.
-J
-J
Again
Good Luck
Chris
Thread Starter
Teching In
Joined: Jun 2004
Posts: 33
Likes: 0
I did a search and didn't really come up with anything. I was just looking at an Ultra-Z hood and a 2" cowl hood from VFN and it looks like the lid might fit...not sure...I'll try searching again, thanks...
http://web.camaross.com/forums/showt...hlight=ram+air
http://web.camaross.com/forums/showt...hlight=ram+air
Those are two from the other site, the same guy posted one here I believe. I'm doing that when I get a WS6 hood. Wonder if anyone has any dyno numbers between swapping LT1 with LS1 style intake.
-J
http://web.camaross.com/forums/showt...hlight=ram+air
Those are two from the other site, the same guy posted one here I believe. I'm doing that when I get a WS6 hood. Wonder if anyone has any dyno numbers between swapping LT1 with LS1 style intake.
-J
